Mahogany Gas Vent Hi-Gloss Paint

Transform the look and performance of your gas-fired heating units with Stove Bright Mahogany Gas Vent Hi-Gloss Paint. This specially formulated paint is conveniently available in a 12oz. spray can, facilitates effortless and precise application to perfectly match your stove's finish. Elevate the appearance of your gas vent pipe while enjoying the following features:

Features:

• Seamless Match: Effortlessly paint your gas vent pipe to harmonize with your stove's finish, creating a cohesive and stylish look that complements popular gas stove heating appliances.
• Temperature Tolerance: With an impressive temperature tolerance of up to 250°F (121°C), this paint is well-suited for the high-temperature environment of gas-fired heating units.
• Sleek Gloss Finish: Achieve a sophisticated and polished gloss finish that adds an extra layer of elegance to your heating appliances.
• Versatile Application: Suitable for direct use on metal surfaces or over a shop coat primer, providing flexibility in application for a professional finish.
• Convenient Aerosol Spray: The 12oz. spray can ensure a hassle-free and even application, streamlining the painting process for efficiency and precision.
• Color Match: Specifically designed in a Mahogany Gloss color to seamlessly integrate with major brand porcelain stoves, ensuring a flawless blend with your existing appliances.

Important Details:

• Heat Resistant: Resistant to temperatures up to 250°F/121°C, making it a reliable choice for gas vent stove pipes.
• Application Limitations: Not suitable for single-wall wood stove pipes, and no clear top coat is needed for the finishing touch.
• Temperature Endurance and Surface Limitations: Endures High Temperatures: Capable of withstanding temperatures up to 250°F/121°C, highlighting its resilience in high-heat environments.
• Gloss Finish: The paint features a gloss finish, providing both aesthetic appeal and protection.

Important Reminder: This product is exclusively designed for gas vent pipes and metal surfaces not exceeding 250°F. Avoid using it on Wood Stove, Pellet Stove, or Gas Stove surfaces. Enhance both the aesthetics and durability of your gas-fired heating units with Stove Bright Mahogany Gas Vent Hi-Gloss Paint.

Specifications:

• Color: Mahogany
• Finish Type: Hi-Gloss
• Size: 12 Ounce (Pack of 1)
• Paint Type: Spray
• Specific Uses For Product: Gas Vent Pipe Only
• Surface Recommendation: Metal
• Item Form: Aerosol
• Tested to 250 degrees F

STOVE BRIGHT® GAS VENT PIPE PAINT: Comprehensive Guide for Application and Maintenance

Heat Resistant up to 250°F/121°C with a Gloss Finish

Important Note: DO NOT use on Wood Stove, Pellet Stove, or Gas Stove surfaces. For use ONLY on vent pipes for gas units or metal not exceeding 250°F.

Surface Preparation:
To achieve optimal results, thorough surface preparation is essential. STOVE BRIGHT Gas Vent Pipe Paint is designed for direct application on properly prepared metal surfaces without the need for a primer. Follow these steps for effective surface preparation:

For Bare Sheet Metal or Stainless Substrates:

• Remove all rust, peeling, or chipping paint using sandpaper, wire brush, wire wheel, or sandblasting.
• Lightly scuff the surface with a plastic painter's Scotch-Brite pad or fine grit (180-220) sandpaper to provide a coating profile.
• Wipe off sanding residue and contaminants with a clean white cloth and Stove Bright Paint Prep, acetone, or lacquer thinner.

For Bare Galvanized Substrates:

• Conduct an 'acid etch' using a one-to-one solution of white vinegar and water.
• Wipe the solution on the metal with a clean white cloth, let it dry, rinse with warm water, and allow the metal to dry completely.

Painting Over Existing Coating:

• Test compatibility by scuffing a small area with 180-220 grit sandpaper.
• Wipe down with Stove Bright Paint Prep, acetone, or lacquer thinner.
• Shake the aerosol can for 2 minutes, apply a thin coat, and wait up to 10 minutes for a reaction.
• If no reaction occurs, proceed with additional coats. Incompatibility requires removing the existing coating down to bare metal.

Application and Drying Time:

• Follow these guidelines for the application and drying of STOVE BRIGHT Gas Vent Pipe Paint:
• Ensure an air temperature between 65°-80°F with low humidity, and a surface temperature not exceeding 90°F during application.
• Vigorously shake the aerosol can for at least one minute to mix the product.
• Test spray on cardboard to confirm proper spray.
• Hold the aerosol can 12-15" away and apply a light tack coat. Let it rest for 2 minutes.
• The next coat should be a flow coat for full coverage.
• Allow 24 hours for touch-ups, and the paint dries in approximately 3 hours to touch, air curing in 2 days.

Ensure your painting area has adequate ventilation, wear chemical-resistant gloves and eye protection, and refer to caution labels on products before use. Make your gas vent pipes stand out with the durability and aesthetic appeal of STOVE BRIGHT Gas Vent Pipe Paint.