Convection Blower Pellet Stove Distribution Replacement Room Blower Motor Fan Assembly 80647 A-E-033A

Product Specifications:

• • • Volts: 115
    • Speed: 3000 RPM
    • Cycles: 60Hz
    • Amps: 2.1 LFA
    • Wiring Connectors: 1 Male & 1 Female Wire Lead
    • Part Type: Convection Blower Motor
    • Mounting Plate Dimensions: 4" x 4 3/8" (bracket), 3-3/4" x 3-1/2" Center to Center
    • Motor Protection: Thermally Protected

DESCRIPTION:

Convection blower replacement for select Breckwell pellet stoves and inserts. Some older P2700 units will not work with this blower. The mounting plate measures 4′′ X 4 3/8′′.

The Distribution Convection Room Blower fulfills two functions. The stove provides heat to the room by circulating the room air through the heat exchanger, and this process also keeps the stove from overheating. If your stove displays an overheat error code OR if the room blower remains on at startup and does not feed pellets, your room blower has either stopped working OR the blower wheel inside the housing of this blower needs to be cleaned out so that it can freely move enough air to keep the stove from overheating.

Note: An adapter plate A-MP-KIT is required if you have an older Breckwell stove with mounting plate dimensions of 5" x 5 1/2".

When replacing a room blower, part C-E-090-21 is recommended that the high limit safety snap disc switch be replaced.

Replacement For Part Numbers:

• 80647
• A-E-033A
• PP7310
• C-E-029

COMPATIBLE MODELS

Breckwell Pellet Stoves:

• P1000 Big E
• P2000 Tahoe
• P2000I Tahoe Insert
• P22 Maverick
• P22I Maverick Insert
• P23 Sonora
• P23I Sonora Insert
• P24 Blazer
• P24I Blazer Insert
• P26 Cadet
• P2700 Mojave
• P32i Cadet
• P4000 Classic Cast
• P6000 Multi-Fuel

USSC Pellet Stoves:

• 5040 Pellet Heater

May fit other models, please check your owner's manual for part number compatibility.