7 Feet 3/4" Door Rope Gasket For Whitfield Traditions T300P
- View all options as list
| Sort by Price | Sort by Availability | Sort by CODE | Sort by [FRG-GASKETKIT]Add Gasket Adhesive Or Gasket Cement |
|---|---|---|---|
|
$3013
|
Available
|
3/4-RNDGSK-7FT-AW83-Nonreturnable-CUSTOM
|
[FRG-GASKETKIT]Add Gasket Adhesive Or Gasket Cement:
|
|
$3634
|
Available
|
3/4-RNDGSK-7FT-AW80-Nonreturnable-CUSTOM
|
[FRG-GASKETKIT]Add Gasket Adhesive Or Gasket Cement:
|
Replace a worn door seal on your Whitfield Traditions T300P pellet stove with this 3/4" round fiberglass rope gasket. Supplied in a 7-foot length, the gasket is infused with black graphite for durability, flexibility, and resistance to abrasive conditions.
A properly fitted door gasket helps restore the seal around the stove door, supporting efficient combustion while reducing unwanted air leakage and heat loss. The flexible rope construction also allows the gasket to follow curves in the stove door gasket channel during installation.
Before installing the new gasket, remove the old gasket material and thoroughly clean the gasket channel or mounting surface. Secure the replacement gasket with a suitable stove gasket adhesive or stove gasket cement.
Key Features:
- Designed for the Whitfield Traditions T300P pellet stove
- 3/4" round fiberglass rope gasket
- Supplied in a 7-foot length
- Black graphite-infused construction
- Rated for temperatures up to 1000°F
- Flexible construction follows curves in the gasket channel
- Resists unraveling for dependable performance
- Helps restore the stove door seal
- Non-asbestos material
- Water-resistant and mold-proof
Important Information:
Stove gasket cement or an appropriate gasket adhesive is recommended for securing the rope gasket.
Do not use high-temperature silicone sealant as the adhesive for this gasket or as a substitute for appropriate stove repair products.
Always verify the required gasket diameter and length before installation. Stove model identification and the dimensions of the existing gasket channel should be checked whenever there is uncertainty about fit.
FAQs:
Q: Is this gasket intended for the Whitfield Traditions T300P?
A: Yes. This 3/4" x 7' rope gasket is listed for the Whitfield Traditions T300P pellet stove.
Q: What size is the gasket?
A: The gasket is 3/4" in diameter and is supplied in a 7-foot length.
Q: What is the gasket made from?
A: It is made from fiberglass rope infused with black graphite.
Q: What temperature can the gasket withstand?
A: The supplied product information rates the gasket for temperatures up to 1000°F.
Q: Do I need adhesive to install the gasket?
A: Yes. Use a suitable stove gasket adhesive or stove gasket cement to secure the gasket according to the installation requirements of your stove.
Q: Can I use high-temperature silicone instead of gasket cement?
A: No. High-temperature silicone sealant should not be used as the adhesive for this rope gasket.
Fit / Measuring / Safety Notes:
- Confirm that your stove is a Whitfield Traditions T300P before ordering based on model compatibility.
- When possible, consult the stove owner's manual or manufacturer parts information for the specified replacement gasket.
- Measure the width and depth of the gasket channel if the original gasket size cannot be confirmed.
- Measure the approximate length required around the door before cutting the new gasket.
- Leave the gasket uncut until you have confirmed the required finished length.
- Remove the old gasket and residual adhesive before installing the replacement.
- Clean the gasket channel or mounting surface before applying new adhesive or cement.
- Use stove gasket cement or another suitable gasket adhesive for installation.
- Do not use high-temperature silicone sealant as the gasket adhesive.
- After installation, check the stove door seal before returning the appliance to normal operation.
- Follow the stove manufacturer's installation, curing, operation, and safety instructions where applicable.
Helpful Links:
Product Details / Specifications:
- Compatible Stove: Whitfield Traditions T300P pellet stove
- Product Type: Door rope gasket
- Gasket Diameter: 3/4"
- Gasket Length: 7'
- Gasket Shape: Round rope
- Material: Fiberglass
- Treatment: Black graphite-infused
- Maximum Temperature Rating: Up to 1000°F
- Asbestos: Non-asbestos
- Properties: Water-resistant and mold-proof
- Adhesive: Stove gasket cement or suitable gasket adhesive recommended
- Installation: Trim gasket to the required finished length as needed
Installation:
- Remove the stove glass and old gasket.
- Clean the edge of the glass and the mounting surfaces thoroughly.
- Fit the gasket evenly around the edge of the glass.
- Reinstall the glass and tighten the retainers carefully.
- Check that the gasket provides an even seal around the entire perimeter.
Note: Do not overtighten the glass retainers. The glass should be held securely while still allowing for normal thermal expansion during stove operation.
Manufacturer Warranty:
Fast Replacement Glass provides Fiberglass Rope Gaskets to our customers and warrants the product to be free from material defects.
Fast Replacement Glass does not offer warranties on performance or customer use of the gaskets. How a customer handles, installs, and uses processes the gasket product is solely the customer's responsibility. Fast Replacement Glass cannot be held liable for damage, or failure of the product due to wrongful installation.
No reviews found