AW Perkins Stove & Gasket Cement - Black - 2000° F

Rated up to 2000°F!

Wood Stove Gasket Cement Tube Black

Add to Wishlist


Confidently replace the gasket in your stove door with this fail-proof Black Wood Stove Gasket Cement in a 2.7 ounce tube! This stove gasket adhesive is capable of bonding fiberglass to the steel or cast iron of your stove's gasket channel. It can even seal small voids or cracks that may occur in your stove's surface and service small repairs! Once cured, this high temperature gasket cement can withstand extreme temperatures up to 2000°F. No need to use a sealant or adhesive when replacing your gasket - this specially made cement will do the job on its own! Also available in a 10.3 ounce cartridge application for caulking guns.

Size: 2.7 ounce tube
Color: Black
Temperature Rating: 2000°F (1095°C)
  • Preparation:
    • Remove old gasket. Thoroughly clean the area. Wear rubber gloves to apply the cement.
  • To use:
    • Knead to encourage a uniform consistency. Cut the tip of the tube to the desired bead width and express an even amount of cement into the door channel by squeezing the tube.
    • Press your new gasket firmly into the cement. Use a wet cloth to wipe off any excess cement, then (with your door open) let the product dry for one hour. For the first fire after replacing your gasket, gradually heat up your application to cure the cement. This product is meant for indoor stove applications only.


Thanks for your telephone help - have a good Thanksgiving!
Write a review
Last updated on November 1st 2017.