Replacement Ceramic Glass for Pacific Energy Vista, Neo & Alderlea Stoves

Overview: 

Replace damaged or broken stove glass with this custom-cut ceramic replacement glass made for select Pacific Energy stove models. Measuring 16 3/16" wide by 10 3/8" high and 3/16" thick, this panel fits the Pacific Energy Vista LE, Neo 1.2, Neo 1.6, Alderlea 1.2, Alderlea T4, and FP16 models listed below.

The ceramic glass features a subtle amber tint and is designed to withstand temperatures up to 1250°F. Unlike ordinary tempered glass, ceramic glass is manufactured to tolerate the high temperatures and rapid temperature changes encountered in compatible heating appliances.

Key Features:

• Custom-cut ceramic replacement glass for select Pacific Energy models
• Measures 16 3/16" wide x 10 3/8" high
• 3/16" glass thickness
• Withstands temperatures up to 1250°F
• Subtle amber tint
• Designed to resist thermal shock from high-temperature operation
• Suitable for the specifically listed Pacific Energy stove models

Important Information: 

Proper installation clearance is essential. Allow at least 1/8" of room for thermal expansion. Installing the glass without adequate expansion clearance can place stress on the panel and cause breakage.

Mounting screws and other metal hardware also expand as the stove heats. Do not overtighten glass-retaining hardware. The glass should be securely retained without being rigidly compressed by the mounting hardware.

Do not substitute ceramic glass for tempered glass simply because the dimensions match. The correct glass type depends on the appliance design and manufacturer requirements. Ceramic glass should never be installed in a factory-built or prefab fireplace unless the unit is specifically heater-rated and approved for this type of glass. Always consult the appliance owner's manual before installation.

FAQs: 

Q: What size is the glass?
A: The panel measures 16 3/16" wide by 10 3/8" high and is 3/16" thick.

Q: Is this tempered glass?
A: No. This is ceramic replacement glass intended for high-temperature stove applications.

Q: How much expansion clearance should I leave during installation?
A: Allow at least 1/8" of room for thermal expansion.

Q: Should I tighten the glass-retaining hardware firmly?
A: The hardware should secure the glass without being overtightened. Metal hardware expands when heated, and excessive pressure can contribute to glass damage.

Fit / Measuring / Safety Notes:

• Verify the exact stove model before ordering.
• Confirm the 16 3/16" x 10 3/8" dimensions against the existing glass or appliance documentation.
• Confirm that the appliance requires 3/16" ceramic glass.
• Provide at least 1/8" of clearance for thermal expansion.
• Do not overtighten screws, clips, or other glass-retaining hardware.
• Do not replace tempered fireplace glass with ceramic glass unless the appliance manufacturer specifically approves the substitution.
• Never install ceramic glass in a factory-built or prefab fireplace unless the unit is heater-rated and approved for ceramic glass.
• Consult the appliance owner's manual when installation requirements or glass type are uncertain.

Helpful Links:

• Browse all Pacific Energy Replacement Glass for Additional Compatible Stove Glass Options
• Shop Stove and Fireplace Door Gaskets to Help Maintain a Proper Seal Around Your Appliance Door and Glass
• How to Replace Glass on a Wood Stove: Step-by-Step Guide
• Caring for Your Wood Stove: Essential Steps for Safe and Efficient Operation
• Contact Us for Help Identifying the Correct Replacement Glass, Confirming Measurements, or Finding Compatible Stove Parts