Replacement Ceramic Stove Glass for Morso Viking 7100, 7110 & 7140

Overview:

Replace damaged or broken stove glass with this custom-cut ceramic replacement glass for Morso Viking 7100, 7110, and 7140 stove models. The glass measures 13 1/2" wide by 10 3/4" high and is 3/16" thick, with a subtle amber tint.

Designed for high-temperature stove applications, this ceramic glass withstands temperatures up to 1250°F and resists the thermal shock caused by repeated heating and cooling. Ceramic glass can withstand up to three times the heat of tempered glass.

Key Features:

• Custom-cut ceramic replacement glass
• Fits Morso Viking 7100, 7110, and 7140 stove models
• Measures 13 1/2" x 10 3/4"
• 3/16" thick
• Withstands temperatures up to 1250°F
• Subtle amber tint
• Designed to resist extreme temperature changes and thermal shock
• Suitable for high-temperature wood, coal, and pellet stove applications when compatible with the appliance

Important Information:

Ceramic glass expands when heated. Allow at least 1/8" of room for thermal expansion during installation. Insufficient clearance can place stress on the glass and cause breakage.

Mounting screws and other metal hardware also expand when exposed to high temperatures. Do not overtighten the mounting hardware against the glass.

Do not substitute ceramic glass for tempered glass in a fireplace door unless the appliance or door is specifically approved for ceramic glass. Ceramic glass should never be installed in a factory-built or prefab fireplace unless the unit is heater-rated and the appliance manufacturer permits its use. Always consult the appliance owner's manual before changing glass types.

FAQs:

Q: What are the glass dimensions?
A: The glass measures 13 1/2" wide by 10 3/4" high and is 3/16" thick.

Q: Is this tempered glass?
A: No. This is ceramic glass designed for high-temperature stove applications.

Q: Should the glass fit tightly inside the frame?
A: No. The provided installation guidance calls for at least 1/8" of room for thermal expansion.

Q: Should I tighten the mounting hardware firmly against the glass?
A: No. Avoid overtightening because metal mounting hardware expands as it heats and can place damaging pressure on the glass.

Fit / Measuring / Safety Notes:

• Confirm your stove model before ordering.
• Verify the required glass dimensions against your existing glass, opening, or appliance documentation before installation.
• Allow at least 1/8" of room for thermal expansion.
• Do not overtighten screws, clips, or other mounting hardware against the ceramic glass.
• Follow the stove manufacturer's installation and clearance requirements.
• Do not replace tempered fireplace-door glass with ceramic glass unless the appliance is specifically approved for that application.
• Do not install ceramic glass in a factory-built or prefab fireplace unless the unit is heater-rated and approved for ceramic glass.
• Replace damaged mounting components or worn sealing materials as needed before operating the stove.

Helpful Links:

• Browse other Morso Replacement Glass Options for Additional Stove Models
• Shop Stove Door Gaskets and Related Replacement Parts for Routine Maintenance
• Read Our Stove & Fireplace Glass Guides
• Caring for Your Wood Stove: Essential Steps for Safe and Efficient Operation
• Contact Us for Help with Measurements, Fit Questions, or Product Selection