Replacement Ceramic Glass for Jotul Lillehammer 200DV Stove

Overview: 

Replace damaged or broken glass in your Jotul Lillehammer 200DV stove with custom pattern-cut Pyroceram ceramic glass. This replacement features a slight amber tint and is designed for the high-temperature conditions found in compatible stove applications.

Ceramic glass is manufactured to tolerate rapid temperature changes and thermal shock associated with stove operation. This glass is 3/16 inch thick and rated to 1250°F (677°C).

Key Features:

• Custom pattern cut for the Jotul Lillehammer 200DV stove
• High-temperature Pyroceram ceramic construction
• Slight amber tint
• 3/16-inch glass thickness
• Rated to 1250°F (677°C)
• Designed to resist thermal shock during stove operation

Important Information: 

This ceramic glass is not appropriate for cooktops.

Ceramic glass expands when heated. Use a metal tape measure and allow at least 1/8 inch of clearance from the mounting surface when determining the required glass dimensions. If the original glass is intact, it may be used as a measuring reference, but measurements should also be checked against the mounting surface.

Mounting screws and other metal hardware also expand under high temperatures. Do not overtighten glass-retaining hardware, as excessive pressure may contribute to glass breakage.

Do not substitute ceramic glass for tempered glass in a fireplace door unless the appliance manufacturer specifically approves ceramic glass for that application. Ceramic glass should not be installed in a factory-built or prefab fireplace unless the unit is heater rated and the manufacturer specifies ceramic glass.

FAQs:

Q: What type of glass is used?
A: This replacement is made from Pyroceram ceramic glass for high-temperature stove applications.

Q: Do I need to leave room for thermal expansion?
A: Yes. Allow at least 1/8 inch of clearance from the mounting surface to accommodate expansion when the glass heats.

Q: Can I use this ceramic glass on a cooktop?
A: No. This glass is not appropriate for cooktop applications.

Q: Should I tighten the mounting hardware firmly against the glass?
A: No. Do not overtighten screws or retaining hardware. Metal hardware expands when heated, and excessive pressure can damage the glass.

Fit / Measuring / Safety Notes:

• Confirm the appliance is a Jotul Lillehammer 200DV before ordering.
• Measure with a metal tape measure for accuracy.
• Allow at least 1/8 inch of clearance from the mounting surface for thermal expansion.
• Verify measurements against the mounting surface even when the original glass is available.
• Do not overtighten screws, clips, or other mounting hardware.
• Follow the appliance manufacturer's instructions for glass installation and approved glass type.
• Do not use this ceramic glass on cooktops.
• Do not substitute ceramic glass for tempered fireplace-door glass unless specifically approved by the manufacturer.
• Do not install ceramic glass in a factory-built or prefab fireplace unless the unit is heater rated and approved for ceramic glass.

Helpful Links:

• View all Jotul Replacement Glass and Compatible Stove Maintenance Products
• Shop Stove Door Gaskets and Related Replacement Parts for Routine Stove Maintenance
• How to Replace Glass on a Wood Stove: Step-by-Step Guide
• Caring for Your Wood Stove: Essential Steps for Safe and Efficient Operation
• Contact Us for Help with Measuring, Glass Selection, or Questions About Your Replacement Glass Order