Center Ceramic Glass for Jamestown J1000 & J2000 Stove Models

Overview:

Replace the center glass in a compatible Jamestown J1000 or J2000 stove with this custom-cut ceramic replacement glass. The panel measures 11" wide by 8 7/8" high and is 3/16" thick, with a subtle amber tint.

Designed for high-temperature stove applications, this ceramic glass withstands temperatures up to 1250°F and is manufactured to resist thermal shock caused by extreme temperature changes. Ceramic glass can withstand up to three times the heat of tempered glass.

Key Features:

• Custom-cut ceramic replacement glass for the center position
• Fits the listed Jamestown J1000 and J2000 stove models
• Measures 11" wide x 8 7/8" high x 3/16" thick
• Withstands temperatures up to 1250°F
• Subtle amber tint
• Designed to resist thermal shock from extreme temperature changes
• Suitable ceramic glass material for high-temperature stove applications

Important Information:

Proper installation clearance is essential. Allow at least 1/8" of room for thermal expansion. Without sufficient clearance, the glass can expand during heating and break.

Metal screws, retainers, and other mounting hardware also expand when exposed to high temperatures. Do not overtighten mounting hardware against the glass.

Ceramic glass should not be substituted for tempered glass on fireplace doors unless the appliance or door is specifically approved for ceramic glass. Do not install ceramic glass in a factory-built or prefab fireplace unless the unit is heater-rated and approved for this type of glass. Consult the appliance owner's manual before replacing the original glass material.

FAQs:

Q: What size is the replacement glass?
A: The glass measures 11" wide by 8 7/8" high and is 3/16" thick.

Q: Is this tempered glass?
A: No. This product is ceramic glass designed for high-temperature stove applications.

Q: How much expansion clearance should I allow?
A: Allow at least 1/8" of room for thermal expansion to help prevent breakage as the glass heats and expands.

Q: Should the mounting hardware be tightened firmly against the glass?
A: No. Do not overtighten screws or mounting hardware. Metal components expand when heated and excessive pressure can damage the glass.

Q: Can this ceramic glass replace tempered fireplace-door glass?
A: Not unless the fireplace or door is specifically approved for ceramic glass. Check the appliance owner's manual before changing glass types.

Fit / Measuring / Safety Notes:

• Confirm that your appliance is a Jamestown J1000 or J2000 and that you are replacing the center glass panel.
• Verify the required 11" x 8 7/8" dimensions and 3/16" thickness before installation.
• Allow at least 1/8" of room for thermal expansion.
• Do not overtighten screws, clips, or other mounting hardware against the glass.
• Check mounting components and surrounding gasket material during replacement.
• Follow the appliance manufacturer's installation and safety instructions.
• Do not replace tempered fireplace-door glass with ceramic glass unless the appliance is specifically approved for that material.
• Do not install ceramic glass in a factory-built or prefab fireplace unless the unit is heater-rated and approved for ceramic glass.
• Stop using the appliance if the installed glass becomes cracked or damaged.

Helpful Links:

• Browse Additional Jamestown Replacement Glass Options for Other Stove Glass Applications
• Shop Stove Door Gaskets and Related Replacement Parts for Routine Maintenance
• Read Our Stove & Fireplace Glass Guides
• Caring for Your Wood Stove: Essential Steps for Safe and Efficient Operation
• Contact Us for Help with Measurements, Fit Questions, or Replacement Glass Selection