Replacement Ceramic Glass for Drolet Escape 1400 & 1400i Stoves

Overview:

Restore the viewing area of your Drolet stove with ceramic replacement glass made for the Drolet Escape 1400 and Escape 1400i models. This replacement measures 16 7/8" wide by 8 5/8" high and 3/16" thick, with square sides and an arched top that follows the original glass configuration described for these appliances.

The ceramic glass has a subtle amber tint and is designed to withstand temperatures up to 1250°F. Its resistance to rapid temperature changes makes ceramic glass appropriate for the high-temperature environment of the listed wood stove models.

Key Features:

• Fits the listed Drolet Escape 1400 and Escape 1400i stove models
• 16 7/8" wide x 8 5/8" high
• 3/16" thick ceramic glass
• Square sides with an arched top
• Subtle amber tint
• Withstands temperatures up to 1250°F
• Ceramic construction resists rapid temperature changes

Important Information:

Confirm your stove model and compare the required glass dimensions and shape before ordering. Model names alone should not replace physical measurement when verifying replacement glass.

Ceramic glass expands as it heats. Installation should provide at least 1/8" of clearance at the mounting surface for thermal expansion. Do not force the glass into the opening or overtighten screws, clips, or other retaining hardware against the glass.

This ceramic glass should not be installed in a factory-built fireplace or prefab unit unless that appliance is specifically heater-rated for the application. Always follow the appliance manufacturer's instructions for replacement glass and installation.

FAQs:

Q: What are the glass dimensions?
A: The glass measures 16 7/8" wide by 8 5/8" high and is 3/16" thick.

Q: What temperature can the glass withstand?
A: The supplied product information lists a temperature rating of up to 1250°F.

Q: Should I measure my existing glass before ordering?
A: Yes. Verify the dimensions, shape, and stove model before ordering to help confirm the correct replacement.

Q: Should the mounting hardware be tightened firmly against the glass?
A: No. Avoid overtightening screws, clips, or other hardware because excessive pressure can damage ceramic glass.

Fit / Measuring / Safety Notes:

• Verify the appliance is a Drolet Escape 1400 or Escape 1400i before ordering.
• Compare the required opening, glass dimensions, and arched shape with the listed replacement.
• Use a tape measure to confirm the dimensions needed for your stove.
• Allow at least 1/8" of room for thermal expansion at the mounting surface.
• Do not force ceramic glass into an opening that is too tight.
• Do not overtighten metal screws, clips, or retaining hardware against the glass.
• Follow the appliance owner's manual when replacing stove door glass.
• Do not use this ceramic glass in a factory-built fireplace or prefab unit unless the appliance is heater-rated for the intended application.
• Replace damaged glass before operating the appliance.

Helpful Links:

• View all Drolet Replacement Glass and Replacement Motors and Parts
• Shop Wood Stove Door Gaskets and Related Replacement Parts
• Read Our Stove & Fireplace Glass Guides
• Caring for Your Wood Stove: Essential Steps for Safe and Efficient Operation
• Contact Us for Help Identifying the Correct Replacement Glass Before Ordering