4 x 7 x 2 Inch Rectangular Canned Catalytic Combustor CC-552

4 x 7 x 2 Inch Rectangular Canned Catalytic Combustor CC-552

Price in points: 18595 points
Add to Wishlist


4" high by 2" wide by 7" long 25 cell replacement catalytic combustor with metal band. This canned ceramic honeycomb combustor fits the following models of wood stoves:

  • Buck Stove 20
  • Buck Stove 20 ZC
  • Buck Stove 41
  • Buck Stove 50
  • Buck Stove 70 Bay
  • Country Comfort Orville 350CC
  • Jotul 3TDIC-2
  • Jotul Alpha
  • Jotul Firelight
  • Jotul Series 3
  • Jotul Series 8

Ships within 48 hours.

Model: CC-552 
Height: 4"
Length: 7"
Width: 2"
Cells Per Inch: 25

What you need to know about catalytic combustors


Manufacturer Warranty:

Combustors are guaranteed to contain sufficient catalytic precious metals (platinum and/or palladium) formulated and properly applied to conform to requirements of the U.S. Environmental Protection Agency for certified wood-burning products, and when installed in USA are warranted for structural integrity for five years or 12,000 hours burn-time, whichever comes first, when correctly installed and maintained. Failure due to incorrect use, including with fuels other than dry natural wood, is excluded.

REMEDIES UNDER THIS WARRANTY Manufacturer will replace a defective combustor, free of charge, for the first 90 days following the date of original purchase. After the first 90 days, replacement will be at the following discount:

  • Year 1 — 50% of original price paid
  • Year 2 — 40% of original price paid
  • Year 3 — 30% of original price paid
  • Year 4 — 20% of original price paid
  • Year 5 — 10% of original price paid
  • Year 6 — Replacement at current retail price.

Estimated Lead time

Estimated Lead Time:

5-10 Business Days.

Product can not be shipped to Canada!

Product Question

I need to replace the catylst on a Jotul model 3TDIC-2. Their part # is126421. it is in 2 rectangular pieces with the metal band retaining the two pieces. I assume the replacement being one piece will fit in the existing band? As for the dimensions it looks to be about the 4 x 7 and lays flat with a height of maybe 2 inches. Wanted to be sure I get the right thing. It also needs the insulation replaced. Is their a generic material to just cut that to size? It is fits around the metal enclosure. The Jotul part for insulation is 127194.

Asked by Jim Butler | 12-11-2017, 08:37 PM | 0 answer(s)


No posts found

Write a review
Last updated on February 2nd 2018.