Free shipping within the continental United States!
Did you know that thermal shock (heating and cooling too quickly) can actually break down the integrity of your catalytic combustor over time? That's why we recommend replacing this important device every 12,000 hours. Not only will this improve the efficiency of your heating application up to 50%, but it will also cut down on the amount of creosote build up in the chimney. Burn smart and clean with a new catalytic combustor!
Platinum and palladium are the catalysts in our combustors. These metals are applied to the honeycomb of the combustor (either ceramic or steel) and cause the gases from a fire to burn at lower temperatures, instead of escaping through the pipe or flue.
PLEASE NOTE: Your wood stove or fireplace will need a bypass damper in order to use a catalytic combustor. (When the exhaust temperature isn't high enough for a combustor to "light-off" the wood-smoke, the exhaust must have an alternate route to go until the combustor is hot enough to perform its function.)
Will I Need A Gasket For My Catalytic Combustor?
Combustors that have no stainless steel "can" must always be installed with a new expanding gasket. Uncanned combustors are manufactured with a CatGard (an expanding gasket that is wrappped around the combustor) at no extra charge. The factory ships the correct gasket already in place, with masking tape to hold the gasket in the proper position during installation.
Federal law requires any EPA-certified catalytic wood stoves be operated with combustors to reduce air pollution over the entire life of the stove.
|Model:||CC-008 (Set of Two)|
|Cells Per Inch:||25|
Combustors are guaranteed to contain sufficient catalytic precious metals (platinum and/or palladium) formulated and properly applied to conform to requirements of the U.S. Environmental Protection Agency for certified wood-burning products, and when installed in USA are warranted for structural integrity for five years or 12,000 hours burn-time, whichever comes first, when correctly installed and maintained. Failure due to incorrect use, including with fuels other than dry natural wood, is excluded.
REMEDIES UNDER THIS WARRANTY Manufacturer will replace a defective combustor, free of charge, for the first 90 days following the date of original purchase. After the first 90 days, replacement will be at the following discount:
Estimated Lead Time:
5-10 Business Days.
Product can not be shipped to Canada!
Feel free to contact us if you have any questions or need more information about this product. For general information, or inquiries not related to this product, please contact us directly instead. Thank you!
No posts found