Replacement 5/8" Rope Gasket Kit for Timber Ridge Stove Doors

Replace a worn or compressed Timber Ridge stove door seal with this 5/8" black graphite fiberglass rope gasket kit. A properly fitted gasket helps limit unwanted air leaks, support better burn control, and maintain efficient stove performance.

The round fiberglass rope is infused with black graphite for durability, flexibility, and dependable performance in demanding heating conditions. It follows curved door channels, resists unraveling, and withstands temperatures up to 1000°F. Choose clear gasket adhesive or stove gasket cement for installation.

Key Features:

• 5/8" round fiberglass rope gasket
• Black graphite-infused construction
• Rated for temperatures up to 1000°F
• Flexible design conforms to curved door channels
• Helps restore an airtight stove door seal
• Resists unraveling under extreme heat
• Non-asbestos construction
• Does not absorb water
• Resistant to mildew
• Choice of clear gasket adhesive or stove gasket cement

Important Information:

Remove the old gasket and adhesive completely before installing the replacement. Clean the gasket channel thoroughly to support proper bonding and sealing.

Use only gasket adhesive or stove gasket cement intended for stove and insert applications. Do not use high-temperature silicone sealant to attach the gasket or repair the appliance.

FAQs:

Q: How do I confirm that 5/8" is the correct gasket size?
A: Check the stove manual or manufacturer replacement information first. You can also measure the width and depth of the existing gasket channel.

Q: Can the rope gasket be trimmed to length?
A: Yes. Measure the required length and trim the replacement gasket during installation.

Q: Which adhesive should I choose?
A: Select either clear gasket adhesive or stove gasket cement based on the available product options and your installation needs.

Q: Can I use high-temperature silicone instead?
A: No. High-temperature silicone should not be used to install the rope gasket or repair the stove or insert.

Q: What temperature can this gasket withstand?
A: The fiberglass rope gasket is rated for temperatures up to 1000°F.

Fit / Measuring / Safety Notes:

• Confirm that a 5/8" round gasket is specified for your Timber Ridge stove model.
• Use the appliance manual or spare-parts reference number when available.
• Measure the gasket channel rather than relying only on the compressed old rope.
• Verify the required total gasket length before ordering.
• Clean and prepare the channel before applying adhesive or cement.
• Allow the bonding product to cure as directed before using the appliance.
• Do not substitute high-temperature silicone sealant.
• Wear appropriate protection when removing old gasket material and residue.

Helpful Links:

• Maintenance & Care
• Gasket Replacement Guide
• Stove Education