Custom R7 Pattern Cut Ceramic Glass for Stove & Insert Doors
Replace worn or broken stove glass with a custom-cut Pyroceram Ceramic Glass R7 Pattern Cut. This specialty shape features an offset gable top with a clipped bottom corner and is manufactured to the measurements you provide. Designed for high-temperature applications, this ceramic glass is suitable for compatible wood, pellet, and coal stoves and inserts where direct flame contact occurs.
Key Features:
- Custom-cut R7 pattern to your supplied dimensions.
- Offset gable top with clipped bottom corner design.
- Manufactured from heat-resistant Pyroceram ceramic glass.
- Built to withstand thermal shock from repeated heating and cooling.
- Crafted by American craftsmen using your measurements.
Important Information:
Measure the mounting opening carefully before ordering. To allow for normal thermal expansion, leave approximately 1/8 inch of clearance between the glass and the mounting surface. If your original glass is intact, it may be used as a measuring reference, but verifying measurements against the appliance opening is strongly recommended.
This ceramic glass is not intended for cooktops or factory-built fireplaces unless specifically approved by the appliance manufacturer.
FAQs:
Q: Is this glass cut to my measurements?
A: Yes. Every R7 Pattern Cut panel is custom manufactured using the dimensions you provide.
Q: Can this glass be installed on a cooktop?
A: No. This ceramic glass is not designed for cooktop applications.
Q: How much clearance should I allow when measuring?
A: Leave approximately 1/8 inch around the glass to accommodate thermal expansion during operation.
Q: Can I measure my existing glass?
A: Yes. If the original glass is intact, you may use it as a reference, but always verify the measurements against the mounting surface for the best fit.
Fit / Measurement / Safety Notes:
- Verify all measurements before submitting your custom order.
- Leave approximately 1/8 inch of clearance for thermal expansion.
- Do not overtighten glass retainers or mounting hardware.
- Prevent logs, fireplace tools, and other objects from contacting hot glass.
- Consult your appliance owner's manual before replacing the glass.
Fit / Measuring / Safety Notes:
- Measure the mounting opening carefully before ordering.
- Allow approximately 1/8 inch clearance for glass expansion.
- Do not overtighten retaining clips or mounting hardware.
- Use only in compatible wood, pellet, or coal stoves and inserts.
- Do not install in factory-built or prefabricated fireplaces unless specifically approved by the appliance manufacturer.
- Prevent logs and fireplace tools from striking the glass during use.
Helpful Links:
Product Details / Specifications:
- Custom-made Pyroceram Ceramic Glass R7 Pattern Cut
- Offset gable top with clipped bottom corner
- Precision cut to customer-provided dimensions
- Heat-resistant ceramic glass
- Designed to resist thermal shock
- Suitable for compatible wood stoves, pellet stoves, coal stoves, and inserts
- Made by American craftsmen
Manufacturer Warranty:
Fast Replacement Glass provides pyroceram ceramic glass to our customers based on specific size requirements. We warrant to our immediate customers that the glass product ordered will meet certain standards and will be free from material and workmanship defects on the day of shipment.
Fast Replacement Glass does not offer warranties on performance or customer use of the glass. How a customer handles, installs, and uses processes the glass product is solely the customer's responsibility. Fast Replacement Glass cannot be held liable for breakage, damage, or failure of the product due to wrongful installation or if the glass pane is too tight and doesn't allow for thermal expansion during operation of the heating appliance.
Estimated Lead Time:
Please give us 5 business days to create this product for you.
No reviews found
