Replacement Ceramic Glass for Lennox EDV4035CNM Fireplace
Overview:
Replacement rectangular ceramic glass for the Lennox EDV4035CNM direct vent gas fireplace. This Pyroceram ceramic glass has an amber transparent tint, measures 3/16 inch thick, and is rated for temperatures up to 1250°F (677°C).
Ceramic glass is designed for high-temperature applications and resistance to thermal shock. Accurate measurements and proper installation clearance are important because the glass and mounting hardware can expand when exposed to heat.
Key Features:
- Designed for the Lennox EDV4035CNM
- Standard rectangular cut
- 3/16-inch Pyroceram ceramic glass
- Amber transparent tint
- Rated to 1250°F (677°C)
- Designed to withstand rapid temperature changes
Important Information:
Use a metal tape measure when verifying the dimensions required for replacement glass. The original information recommends allowing approximately 1/8 inch of clearance for thermal expansion rather than ordering the glass tight against the mounting surface.
If the original glass remains intact, it can be used as a measurement reference. Measurements should also be checked against the appliance's actual mounting area whenever possible.
Do not overtighten screws, clips, or other retaining hardware. Metal hardware expands as it heats, and excessive pressure can damage ceramic glass.
This ceramic glass is not intended for cooktops. Always verify the required glass type and installation requirements in the appliance manufacturer's documentation before replacement.
FAQs:
Q: What type of glass is used?
A: It is Pyroceram ceramic glass designed for high-temperature applications.
Q: Should I measure before ordering?
A: Yes. Use a metal tape measure and verify the required dimensions against the original glass and mounting area whenever possible.
Q: Can I install the glass tightly against the mounting surface?
A: No. The supplied instructions recommend approximately 1/8 inch of accommodation for thermal expansion.
Q: Should the mounting hardware be tightened firmly against the glass?
A: Do not overtighten the hardware. Retainers and other metal components can expand when heated and place damaging pressure on the ceramic glass.
Q: Can this ceramic glass be used on a cooktop?
A: No. The supplied product information specifically states that it is not appropriate for cooktops.
Fit / Measuring / Safety Notes:
- Confirm the appliance model before ordering.
- Use a metal tape measure for accurate measurements.
- Verify dimensions against the mounting area whenever possible.
- If the original glass is intact, use it as a reference but double-check the mounting-area dimensions.
- Allow approximately 1/8 inch of clearance as directed in the supplied measuring information to accommodate thermal expansion.
- Do not overtighten screws, clips, or retaining hardware against ceramic glass.
- Do not use this ceramic glass for cooktops.
- Never substitute glass types solely because the dimensions match.
- Verify the required glass type, clearances, installation method, and appliance suitability with the manufacturer's documentation before installation.
Helpful Links:
- Browse our Lennox Replacement Ceramic Fireplace Glass Options for Additional Sizes and Applications
- View all Specialty-cut Ceramic Glass Patterns for Arched, Clipped-corner, and other Non-rectangular Requirements
- How to Replace Glass on a Wood Stove: Step-by-Step Guide
- Caring for Your Wood Stove: Essential Steps for Safe and Efficient Operation
- Contact Us for Help with Measuring, Specialty Cuts, or Identifying the Correct Replacement Glass Configuration
Product Details / Specifications:
- Material: Pyroceram ceramic
- Thickness: 3/16 inch
- Tint: Amber
- Shape: Standard rectangle
- Temperature Rating: 1250°F (677°C)
- Application Stated in Supplied Product Information: Lennox EDV4035CNM direct vent gas fireplace
- Cooktop Use: Not appropriate
Fits Stove Models:
- Lennox EDV4035CNM
Manufacturer Warranty:
Fast Replacement Glass provides pyroceram ceramic glass to our customers based on specific size requirements. We warrant to our immediate customers that the glass product ordered will meet certain standards and will be free from material and workmanship defects on the day of shipment.
Fast Replacement Glass does not offer warranties on performance or customer use of the glass. How a customer handles, installs, and uses processes the glass product is solely the customer's responsibility. Fast Replacement Glass cannot be held liable for breakage, damage, or failure of the product due to wrongful installation or if the glass pane is too tight and doesn't allow for thermal expansion during operation of the heating appliance.
Estimated Lead Time
Orders typically leave our warehouse within 2–3 business days. After your order ships, delivery time will depend on your location and the carrier's transit schedule.
Processing and shipping times may vary based on product availability and carrier service. If you have any questions about current stock or estimated delivery dates, please contact us before placing your order.
No reviews found