Replacement 5/8" Graphite Rope Gasket for Leisure Line Stove Doors

Restore a dependable seal around your Leisure Line stove door with this 5/8" black graphite fiberglass rope gasket kit. The flexible round gasket follows curved door channels and replaces worn, compressed, or damaged sealing material. When correctly sized and installed, it helps restore an airtight door seal that supports controlled combustion and efficient stove operation.

Key Features:

• 5/8" round fiberglass rope gasket infused with black graphite.
• Flexible construction conforms to curved stove door channels.
• Resists unraveling during high-temperature use.
• Rated for temperatures up to 1000°F.
• Non-asbestos material.
• Does not absorb water and resists mildew.
• Available with clear gasket adhesive or stove gasket cement.

Important Information: Remove the existing gasket and clean all remaining adhesive and debris from the channel before installation. Secure the replacement with a suitable stove gasket adhesive or gasket cement. Do not use high-temperature silicone sealant as a gasket adhesive or as a substitute for proper stove repair cement.

FAQs:

Q: Will this gasket fit every Leisure Line stove? A: Compatibility is not confirmed for every model. Check the stove manual, contact the manufacturer, or measure the existing gasket and channel before ordering.

Q: Does this kit include an adhesive? A: The product is offered with a choice of clear gasket adhesive or stove gasket cement. Confirm the selected option before checkout.

Q: Can I use high-temperature silicone to install the gasket? A: No. Use a gasket adhesive or stove gasket cement intended for this application.

Q: How do I determine the correct gasket size? A: Check the stove manual first. If the size is unavailable, measure the existing gasket and the width and depth of the gasket channel.

Fit / Measuring / Safety Notes:

• Verify the required gasket diameter for the specific Leisure Line stove model.
• Check the owner's manual or manufacturer parts information before ordering.
• Measure the gasket channel width and depth if the original specification is unavailable.
• Measure the approximate rope length and select enough material to trim during installation.
• Remove old gasket material, cement, and debris before fitting the replacement.
• Follow the adhesive or cement instructions, including the stated curing time.
• Do not operate the stove until the gasket is secure and the adhesive has cured.
• Do not use high-temperature silicone as a gasket adhesive.

Helpful Links:

• Maintenance & Care
• Gasket Replacement Guide
• Stove Education