Replace Your Hawke Wood Stove Door Seal with a 5/8" Graphite Rope Gasket Kit
- View all options as list
| Sort by Price | Sort by Availability | Sort by CODE | Sort by [FRG-GASKETKIT]Add Gasket Adhesive Or Gasket Cement |
|---|---|---|---|
$3152
|
Available
|
3/4-RNDGSK-7FT-AW83-Nonreturnable-CUSTOM
|
[FRG-GASKETKIT]Add Gasket Adhesive Or Gasket Cement:
|
$3773
|
Available
|
3/4-RNDGSK-7FT-AW80-Nonreturnable-CUSTOM
|
[FRG-GASKETKIT]Add Gasket Adhesive Or Gasket Cement:
|
Restore the performance of your Hawke wood stove with this 5/8" black graphite fiberglass rope gasket kit. Designed to replace worn or flattened door gaskets, it helps create a dependable airtight seal for improved stove efficiency and burn control. The graphite-infused fiberglass construction remains flexible while resisting wear from repeated heating and cooling cycles.
Key Features:
- 5/8" round fiberglass rope gasket infused with black graphite.
- Helps restore an airtight seal around the stove door.
- Flexible construction conforms to curved gasket channels.
- Resists fraying under normal operating conditions.
- Heat resistant up to 1000°F.
- Non-asbestos material that resists moisture and mildew.
- Available with your choice of clear gasket adhesive or stove gasket cement.
Important Information:
For best results, completely remove the old gasket and clean the gasket channel before installation. Use stove gasket cement or an approved gasket adhesive to secure the new gasket. Do not use high-temperature silicone sealants as a substitute for gasket adhesive or stove repairs.
FAQs:
Q: How do I know if I need a new gasket?
A: If your stove door no longer seals tightly, is difficult to control, or the existing gasket is compressed, brittle, or damaged, replacement is recommended.
Q: Can I trim the gasket to fit?
A: Yes. Purchase enough length to fit your stove door and trim the excess after installation.
Q: Can I use silicone instead of gasket cement?
A: No. High-temperature silicone is not recommended for installing stove door gaskets.
Q: What adhesive should I use?
A: Use stove gasket cement or an approved gasket adhesive designed specifically for fiberglass stove gaskets.
Fit / Measuring / Safety Notes:
- Verify your stove manual to confirm a 5/8" rope gasket is required.
- Measure the gasket channel width and depth if the original size is unknown.
- Purchase slightly more gasket than required and trim during installation.
- Remove all old adhesive and gasket material before installing the new seal.
- Allow adhesive to cure according to the manufacturer's instructions before operating the stove.
Helpful Links:
Product Details / Specifications:
- Fits: Hawke wood stove door applications requiring a 5/8" rope gasket
- Gasket diameter: 5/8 inch
- Material: Graphite-infused fiberglass
- Shape: Round rope gasket
- Temperature resistance: Up to 1000°F
- Non-asbestos construction
- Water and mildew resistant
- Adhesive option: Clear gasket adhesive or stove gasket cement
Installation:
- Remove the stove glass and old gasket.
- Clean the edge of the glass and the mounting surfaces thoroughly.
- Fit the gasket evenly around the edge of the glass.
- Reinstall the glass and tighten the retainers carefully.
- Check that the gasket provides an even seal around the entire perimeter.
Note: Do not overtighten the glass retainers. The glass should be held securely while still allowing for normal thermal expansion during stove operation.
Manufacturer Warranty:
Fast Replacement Glass provides Fiberglass Rope Gaskets to our customers and warrants the product to be free from material defects.
Fast Replacement Glass does not offer warranties on performance or customer use of the gaskets. How a customer handles, installs, and uses processes the gasket product is solely the customer's responsibility. Fast Replacement Glass cannot be held liable for damage, or failure of the product due to wrongful installation.
Hawke Wood Door Gasket Kit With 7 Feet 5/8" Rope Gasket And Gasket Cement
No reviews found
