Replacement 3/8" Fireplace Xtrordinair Stove Door Rope Gasket Kit

Restore the performance of your Fireplace Xtrordinair wood stove with this premium 3/8" black graphite fiberglass rope gasket kit. Designed to replace worn or flattened door seals, this gasket helps maintain an airtight seal for improved stove efficiency, better burn control, and reduced air leaks. The graphite-infused fiberglass construction stays flexible while withstanding temperatures up to 1000°F for dependable, long-lasting performance.

Available with your choice of clear gasket adhesive or stove gasket cement, this kit provides the essential components needed for a reliable gasket replacement.

Key Features:

• Designed for Fireplace Xtrordinair wood stove door applications requiring a 3/8" round rope gasket.
• Premium fiberglass rope infused with black graphite for improved durability and flexibility.
• Withstands temperatures up to 1000°F.
• Helps restore an airtight door seal for improved combustion efficiency.
• Resistant to fraying under normal high-temperature operation.
• Non-asbestos construction.
• Moisture resistant and mildew resistant.
• Flexible rope conforms to curved door gasket channels.
• Choice of clear gasket adhesive or stove gasket cement.
• Gasket cement can also help seal small cracks and pinholes in compatible stove bodies.

Important Information:

For best results, completely remove the old gasket and adhesive before installation. Clean the gasket channel thoroughly to ensure proper adhesion.

Use only a stove gasket adhesive or stove gasket cement designed for this application.

Do not use high-temperature silicone sealant as a substitute for gasket adhesive or for repairing your stove or insert.

FAQs:

Q: How do I know if this is the correct gasket size?
A: Verify your stove's replacement part information, consult the owner's manual, or measure the width and depth of the gasket channel. The gasket should closely match the larger channel dimension for a proper seal.

Q: Can I trim the gasket to length?
A: Yes. It is recommended to purchase a gasket slightly longer than required and trim it during installation.

Q: What adhesive should I use?
A: Use stove gasket adhesive or stove gasket cement designed for wood stove gasket installation.

Q: Can I use high-temperature silicone instead?
A: No. High-temperature silicone is not recommended for attaching rope gaskets or repairing stove bodies.

Q: What temperature can this gasket withstand?
A: The fiberglass rope is rated for temperatures up to 1000°F.

Fit / Measuring / Safety Notes:

• Confirm your stove requires a 3/8 inch round rope gasket before ordering.
• Check your owner's manual whenever possible for the correct replacement part number.
• Measure both the gasket channel width and depth to verify sizing.
• Measure the existing gasket length and trim the new rope for a custom fit.
• Always remove old gasket material and adhesive before installation.
• Allow adhesive or cement to cure according to the manufacturer's instructions before operating the stove.
• Wear appropriate safety equipment when removing old gasket material.
• Using an incorrect gasket size may reduce stove efficiency and sealing performance. 

Helpful Links:

• Maintenance & Care
• Gasket Replacement Guide
• Stove Education