Replacement 3/4" x 7' Rope Gasket for Earth Stove Traditions T305P

Restore the door seal on the Earth Stove Traditions T305P wood pellet stove with this 3/4" x 7' round fiberglass rope gasket. The gasket is made from black graphite-infused fiberglass and is designed to remain flexible while providing a durable sealing surface around the stove door.

The supplied product information identifies this 3/4-inch round, 7-foot gasket specifically for the Earth Stove Traditions T305P. It is also listed for temperatures up to 1000°F and described as a non-asbestos gasket material.

For installation, remove the existing gasket and old adhesive, clean the gasket channel, and secure the replacement using appropriate stove gasket adhesive or cement. Do not use high-temperature silicone sealant as a substitute for gasket adhesive.

Key Features:

• Listed application for Earth Stove Traditions T305P
• 3/4-inch round rope gasket
• 7-foot gasket length
• Black graphite-infused fiberglass construction
• Listed temperature resistance up to 1000°F
• Flexible rope construction for following the stove door gasket channel
• Designed to replace a worn stove door seal
• Non-asbestos material
• Intended for installation with suitable stove gasket adhesive or cement 

Important Information:

Correct gasket size and installation are important for proper stove door sealing. This listing specifies a 3/4" x 7' rope gasket for the Earth Stove Traditions T305P. If the appliance has been modified or its existing gasket does not match these dimensions, verify the required gasket specifications before installation.

Gasket adhesive or stove gasket cement is recommended for installation. Do not substitute high-temperature silicone sealant for the recommended gasket adhesive.

FAQs:

Q: What stove is this gasket listed to fit?
A: The supplied application is the Earth Stove Traditions T305P wood pellet stove.

Q: What size is the gasket?
A: It is listed as a 3/4-inch round rope gasket measuring 7 feet long.

Q: What material is the gasket made from?
A: The supplied product information identifies it as black graphite-infused fiberglass.

Q: What is the listed temperature resistance?
A: The supplied information states a temperature resistance of up to 1000°F.

Q: Do I need adhesive to install the gasket?
A: Yes. Stove gasket adhesive or gasket cement is recommended for securing the rope in the gasket channel.

Q: Can high-temperature silicone be used instead of gasket cement?
A: No. The supplied product information specifically advises against using high-temperature silicone sealant as gasket adhesive.

Q: Can the gasket be trimmed?
A: Yes. Confirm the required finished length before trimming the gasket, and avoid stretching the rope while measuring or installing it.

Q: Should I remove the old adhesive before installing the new gasket?

A: Yes. Remove the old gasket and adhesive residue and thoroughly clean the mounting surface before installing the replacement.

Fit / Measuring / Safety Notes:

• Confirm the stove model and required gasket size before removing or installing the replacement gasket.
• For this listing, the supplied application is the Earth Stove Traditions T305P with a 3/4" x 7' round rope gasket.
• When verifying an unknown or modified gasket application, first check the stove owner's manual or manufacturer replacement-part information.
• If manufacturer information is unavailable, measure both the width and depth of the existing gasket channel and compare those measurements with the required gasket dimensions.
• Measure the approximate length of the existing gasket before removing or cutting replacement rope.
• Confirm that the supplied 7-foot length is sufficient for the complete gasket channel.
• When trimming gasket rope, confirm the required finished length before making the final cut.
• Remove old gasket material and adhesive residue and clean the mounting surface before installation.
• Use gasket adhesive or stove gasket cement suitable for the application.
• Do not substitute high-temperature silicone sealant for the recommended gasket adhesive.
• Do not stretch the fiberglass rope while fitting it into the gasket channel.
• Allow any adhesive or cement to cure according to its manufacturer's directions before operating the appliance.
• If the gasket size or appliance compatibility is uncertain, verify it before installation. 

Helpful Links:

• Maintenance & Care
• Gasket Replacement Guide
• Stove Education