Replacement Door Rope Gasket for Earth Stove T300P – 3/4" x 7'

Restore the door seal on your Earth Stove Traditions T300P with this 3/4" round fiberglass rope gasket. Supplied in a 7-foot length, the gasket is infused with black graphite for durability, heat resistance, and flexibility under abrasive conditions.

A properly fitted door gasket helps maintain an effective seal around the stove door, supporting efficient combustion and reducing unwanted heat loss. The rope is designed to conform around curves in the gasket channel and resist unraveling during normal use.

Before installation, remove the old gasket and thoroughly clean the gasket channel or mounting surface. Secure the replacement rope using an appropriate stove gasket adhesive or stove gasket cement.

Key Features:

• Designed for the Earth Stove Traditions T300P
• 3/4" round fiberglass rope gasket
• 7-foot gasket length
• Black graphite-infused construction
• Rated for temperatures up to 1000°F
• Flexible for installation around door-channel curves
• Designed to resist unraveling
• Helps restore an effective stove door seal
• Non-asbestos construction
• Water-resistant and mold-proof
• Can be installed with suitable gasket adhesive or stove gasket cement

Important Information: Do not use high-temperature silicone sealant as the adhesive for this gasket or as a repair material for the stove or insert. Use a suitable stove gasket adhesive or gasket cement intended for this application.

FAQs:

Q: Is this gasket intended for the Earth Stove Traditions T300P?
A: Yes. The supplied product information identifies this 3/4" x 7' rope gasket for the Earth Stove Traditions T300P.

Q: What size is the gasket?
A: The gasket is 3/4" round and supplied in a 7-foot length.

Q: What is the gasket made from?
A: It is a fiberglass rope gasket infused with black graphite.

Q: What temperature is the gasket rated for?
A: The supplied product information states a temperature rating of up to 1000°F.

Q: Do I need adhesive to install the gasket?
A: Yes. A suitable stove gasket adhesive or stove gasket cement should be used to secure the gasket in the channel.

Q: Can I use high-temperature silicone instead of gasket cement?
A: No. High-temperature silicone sealant is not recommended as an adhesive for this gasket or as a repair material for the stove or insert.

Q: How should I prepare the stove before installing the new gasket?
A: Remove the worn gasket and clean the gasket channel or mounting surface before installing and securing the replacement rope.

Fit / Measuring / Safety Notes:

• Confirm the stove model and required gasket size before removing or installing the replacement gasket.
• For this listing, the supplied application is the Earth Stove Traditions T300P with a 3/4" x 7' rope gasket.
• When verifying an unknown gasket application, first check the stove owner's manual or manufacturer replacement-part information.
• If manufacturer information is unavailable, measure both the width and depth of the existing gasket channel and compare those measurements with the required gasket dimensions.
• Measure the approximate length of the existing gasket before purchasing or cutting replacement rope.
• When trimming gasket rope, confirm the required finished length before making the final cut.
• Remove old gasket material and adhesive residue and clean the mounting surface before installation.
• Use gasket adhesive or stove gasket cement suitable for the application.
• Do not substitute high-temperature silicone sealant for the recommended gasket adhesive.
• Allow any adhesive or cement to cure according to its manufacturer's directions before operating the appliance.
• If the gasket size or appliance compatibility is uncertain, verify it before installation.

Helpful Links:

• Maintenance & Care
• Gasket Replacement Guide
• Stove Education