Custom Wood Stove Glass | R8 Pattern Cut
The Custom Pyroceram ceramic glass R8 Pattern Cut is manufactured to your exact specifications for a dependable wood stove glass replacement in high-temperature heating appliances. Featuring straight sides with a unique radius cut-out in one corner, this specialty panel is precision cut in the USA for an accurate fit in compatible heating appliances, including coal, pellet, and wood stove glass doors and fireplace inserts.
Manufactured from high-temperature Pyroceram, this specialty glass panel withstands direct flame exposure and thermal shock up to 1400°F caused by rapid temperature changes. In addition to serving as an ideal wood stove glass replacement, this durable ceramic glass cut is suitable for high-output gas stoves (typically units exceeding 18,000 BTUs) requiring transparent heat-resistant material rather than standard tempered glass.
Key Features:
- Custom cut to your supplied measurements
- R8 pattern with straight edges and one radius cut-out corner
- Manufactured from high-temperature Pyroceram ceramic glass
- Designed to resist thermal shock from rapid heating and cooling
- Suitable for compatible wood, pellet, and coal stoves and inserts
- Precision crafted by American glass specialists
Important Information:
Use the product diagram to verify every required measurement before ordering. Allow approximately 1/8 inch of clearance around the glass for thermal expansion. Because this glass is custom fabricated, it cannot be resized after production.
Install the panel without overtightening screws, clips, or retainers. Metal mounting components can expand as the appliance heats and may place damaging pressure on the glass if installed too tightly.
This ceramic glass is not intended for cooktops. Do not install it in a factory-built fireplace or prefabricated unit unless the appliance manufacturer specifically approves heater-rated ceramic glass.
FAQs:
Q: What appliances is this R8 ceramic glass designed for?
A: It is intended for compatible wood stoves, wood inserts, pellet stoves, pellet inserts, coal stoves, and coal inserts that require the R8 pattern.
Q: What shape is the R8 pattern?
A: The R8 pattern has straight edges with a radius cut-out in one corner. Compare the product diagram with your required glass shape before ordering.
Q: Can this ceramic glass be installed in a cooktop?
A: No. This ceramic glass is not designed or approved for cooktop applications.
Q: How much clearance should I allow when measuring? A: Allow approximately 1/8 inch between the glass edge and the mounting surface for thermal expansion.
Q: Can I measure my existing glass?
A: Yes, if the original glass is intact. You should also compare those measurements with the appliance mounting surface to confirm the required fit.
Q: Can the glass be resized after it is made?
A: No. Verify every measurement before ordering because custom-cut glass cannot be resized after fabrication.
Fit / Measuring / Safety Notes:
- Confirm that the R8 diagram matches the shape required by your appliance.
- Measure every dimension shown on the product diagram.
- Verify measurements against the mounting surface whenever possible.
- Allow approximately 1/8 inch of clearance for thermal expansion.
- Do not overtighten mounting screws, retainer clips, or other hardware.
- Keep logs, fireplace tools, and other hard objects from striking the glass.
- Use only the replacement glass type specified by the appliance manufacturer.
- Do not use this ceramic glass in a cooktop.
- Do not install it in a factory-built fireplace or prefabricated unit unless heater-rated ceramic glass is specifically approved by the manufacturer.
Helpful Links:
Product Details / Specifications:
- Material: Pyroceram ceramic glass
- Pattern: R8
- Shape: Straight sides with one radius cut-out corner
- Cut Type: Custom cut to customer-supplied measurements
- Application: High-temperature heating appliances
- Direct Flame Exposure: Designed for direct flame contact
- Thermal Shock Resistance: Designed to withstand rapid heating and cooling
- Cooktop Use: Not approved
Manufacturer Warranty:
Fast Replacement Glass provides pyroceram ceramic glass to our customers based on specific size requirements. We warrant to our immediate customers that the glass product ordered will meet certain standards and will be free from material and workmanship defects on the day of shipment.
Fast Replacement Glass does not offer warranties on performance or customer use of the glass. How a customer handles, installs, and uses processes the glass product is solely the customer's responsibility. Fast Replacement Glass cannot be held liable for breakage, damage, or failure of the product due to wrongful installation or if the glass pane is too tight and doesn't allow for thermal expansion during operation of the heating appliance.
Estimated Lead Time:
Please give us 5 business days to create this product for you.
No reviews found
