$504.00
Product Specifications: Brand: Breckwell Type: Circuit Board Speed: 5 Speed Motor: 1 RPM Item Dimensions: 8.7 x 6 x 4 inches DESCRIPTION: For specific Breckwell pellet stoves that operate a 1RPM auger motor, this is a replacement OEM control panel with 5-speed settings. Due to the numerous revisions this component has experienced, please be sure to review the information below. This part replaces numerous other part numbers. Tip: Check the spacing on your auger shaft to see if your stove has a 1RPM or 4RPM auger motor. Auger shaft coils spaced 1" apart indicate a 4RPM motor, while coils spaced 2" apart indicate a 1RPM motor. Replacement For Part Numbers: A-E-401 C-E-400 C-E-401 610326 80684 COMPATIBLE MODELS Breckwell Pellet Stoves: P22 - NOT COMPATIBLE (See the A-E-101) P23 - Serial # 7166 to Present P23I - Serial # 2243 to Present P24 - Serial # 53664 to Present P24I - Serial # 53795 to Present P1000 - All Units P2000 - Serial # 11780 to Present P2000I - Serial # 22208 to Present P2700 - Serial # 8445 to Present P4000 - NOT COMPATIBLE (See the A-E-101) The C-E-301 Circuit board used in the following stoves can also be replaced with this new C-E-401 / A-E-401 Circuit board P23 - Serial # up to 7165 P23I - Serial # up to 2242 P24 - Serial # up to 53663 P24I - Serial # up to 53794 P2000 - Serial # up to 11779 P2000I - Serial # up to 22207 P2700 - Serial # up to 8444 Note: If you have a digital control panel and your stove's serial number is lower than those listed above, you will require the C-E-301 control panel. Note: If your current control board is the old-style analog board with dials and rocker switches, you'll need the C-E-404 kit with wiring harness. *Additional Information Serial numbers are approximations and should not be utilized as the sole source of part validation. Serial numbers could be off by up to ten units for either direction. .