Free shipping within the continental United States!

Our glass and stove experts are here to help!

Call us today at 1-888-986-1535

Open 24 Hours For Your Convenience

Model CC-350

Replacement Catalytic Combustor - Canned - 3 x 7 x 2.0 Inch CC-350

 
$114.00
Price in points: 11400 points
CC-350
Available
+
Add to Wishlist

Description

If you notice black smoke escaping from your chimney, accompanied by decreased heat coming from your catalytic heating application, don't take any chances! It's time to replace your canned combustor! These important devices should be changed every 12,000 operating hours or sooner, depending on the condition it is in. Thoroughly inspect this component on a regular basis and check for cracks or clogs, and consider replacing it should the damage be significant. Our high quality ceramic honeycomb designs will restore efficiency to your catalytic stove or fireplace. After a thorough cleaning, enjoy a 90% reduction in creosote build up!

Platinum and palladium are the catalysts in our combustors. These metals are applied to the honeycomb of the combustor (either ceramic or steel) and cause the gases from a fire to burn at lower temperatures, instead of escaping through the pipe or flue.

PLEASE NOTE: Your wood stove or fireplace will need a bypass damper in order to use a catalytic combustor. (When the exhaust temperature isn't high enough for a combustor to "light-off" the wood-smoke, the exhaust must have an alternate route to go until the combustor is hot enough to perform its function.)

  • Will I Need A Gasket For My Catalytic Combustor?
    Canned Combustors: original equipment catalytic combustors that are "canned" (wrapped with a welded stainless steel strip) should be replaced by new combustors that are also canned. Observe that canned combustors have a gasket material sandwiched between the can and the ceramic honeycomb.

    Depending on the particular stove design, heating applications with canned combustors may, or may not, require an additional gasket outside the can for a secure fit inside the stove. In some cases the combustor assembly consists of two or more pieces. In this event, a gasket should be used between the individual pieces for a good fit.

  • THE LAW:
    Federal law requires any EPA-certified catalytic wood stoves be operated with catalytic combustors to reduce air pollution over the entire life of the stove.

Specifications:
Model: CC-350
Height: 2.0 Inches
Width: 3.0 Inches
Length: 7.0 Inches
Cells Per Inch: 25
 
 

 

 

Warranty

Manufacturer Warranty:

Combustors are guaranteed to contain sufficient catalytic precious metals (platinum and/or palladium) formulated and properly applied to conform to requirements of the U.S. Environmental Protection Agency for certified wood-burning products, and when installed in USA are warranted for structural integrity for five years or 12,000 hours burn-time, whichever comes first, when correctly installed and maintained. Failure due to incorrect use, including with fuels other than dry natural wood, is excluded.

REMEDIES UNDER THIS WARRANTY Manufacturer will replace a defective combustor, free of charge, for the first 90 days following the date of original purchase. After the first 90 days, replacement will be at the following discount:

  • Year 1 — 50% of original price paid
  • Year 2 — 40% of original price paid
  • Year 3 — 30% of original price paid
  • Year 4 — 20% of original price paid
  • Year 5 — 10% of original price paid
  • Year 6 — Replacement at current retail price.

Estimated Lead time

Estimated Lead Time:

5-10 Business Days.

Product can not be shipped to Canada!

Features

Fits Stove Type:
  • Buchanan Welding (High Valley) Model 2000 x-tec

Product Question

Feel free to contact us if you have any questions or need more information about this product. For general information, or inquiries not related to this product, please contact us directly instead. Thank you!

Reviews

No posts found

Write a review
Last updated on May 30th 2017.