Free shipping within the continental United States!

Our glass and stove experts are here to help!

Call us today at 1-888-986-1535

Model CC-007

6 x 2 Inch Canned Round Replacement Catalytic Combustor Special Can

 
$162.00
Price in points: 16200 points
CC-007
Available
+
Add to Wishlist

Description

A damaged or worn out combustor leads to heat loss and potential overheating of your catalytic heating application. Replacing the problem results in years of fuel savings, lowered emissions, and increasing heating. We recommend performing this regular upkeep every 12,000 hours - which for some applications, translates to 5-10 years of use! When you consider all of the benefits associated with replacing your combustor, the investment and peace of mind are well worth it!

Platinum and palladium are the catalysts in our combustors. These metals are applied to the honeycomb of the combustor (either ceramic or steel) and cause the gases from a fire to burn at lower temperatures, instead of escaping through the pipe or flue.

PLEASE NOTE: Your wood stove or fireplace will need a bypass damper in order to use a catalytic combustor. (When the exhaust temperature isn't high enough for a combustor to "light-off" the wood-smoke, the exhaust must have an alternate route to go until the combustor is hot enough to perform its function.)

  • Will I Need A Gasket For My Catalytic Combustor?
    Canned Combustors: original equipment catalytic combustors that are "canned" (wrapped with a welded stainless steel strip) should be replaced by new combustors that are also canned. Observe that canned combustors have a gasket material sandwiched between the can and the ceramic honeycomb.

    Depending on the particular stove design, heating applications with canned combustors may, or may not, require an additional gasket outside the can for a secure fit inside the stove. In some cases the combustor assembly consists of two or more pieces. In this event, a gasket should be used between the individual pieces for a good fit.

  • THE LAW:
    Federal law requires any EPA-certified catalytic wood stoves be operated with combustors to reduce air pollution over the entire life of the stove.

Specifications:
Model: CC-007
Height: 2.0 Inches
Diameter: 6.0 Inches
Cells Per Inch: 25
 
 

 

 

Warranty

Manufacturer Warranty:

Combustors are guaranteed to contain sufficient catalytic precious metals (platinum and/or palladium) formulated and properly applied to conform to requirements of the U.S. Environmental Protection Agency for certified wood-burning products, and when installed in USA are warranted for structural integrity for five years or 12,000 hours burn-time, whichever comes first, when correctly installed and maintained. Failure due to incorrect use, including with fuels other than dry natural wood, is excluded.

REMEDIES UNDER THIS WARRANTY Manufacturer will replace a defective combustor, free of charge, for the first 90 days following the date of original purchase. After the first 90 days, replacement will be at the following discount:

  • Year 1 — 50% of original price paid
  • Year 2 — 40% of original price paid
  • Year 3 — 30% of original price paid
  • Year 4 — 20% of original price paid
  • Year 5 — 10% of original price paid
  • Year 6 — Replacement at current retail price.

Estimated Lead time

Estimated Lead Time:

5-10 Business Days.

Product can not be shipped to Canada!

Features

Fits Stove Type:
  • Jotul 3C
  • Jotul 3TIC
  • Jotul 8C

Product Question

Feel free to contact us if you have any questions or need more information about this product. For general information, or inquiries not related to this product, please contact us directly instead. Thank you!

Reviews

No posts found

Write a review
Last updated on August 23rd 2017.