When it comes time to replace the door gasket in your stove, make sure you are using our Wood Stove Gasket Cement in Black! Versatile enough to bond fiberglass to the cast iron or steel of your stove's gasket channel, seal pin-hole voids or cracks on the surface of your heating appliance, and perform small repairs--all with a convenient caulking cartridge! Once it is cured, this high temperature gasket cement can withstand temperatures up to 2000°F! You can get the job done with one incredible gasket adhesive with no need for additional help from another sealant or adhesive! This great product is also available in a 2.3 ounce squeeze tube application.
- Remove old gasket and thoroughly clean the area. Wear gloves to apply the cement.
- Cut the tip of the tube to the desired bead width and expel an even amount of cement into the door channel by squeezing the tube.
- Press your new gasket firmly into the cement. Use a wet cloth to wipe off any excess cement, then (with your door open) let the product dry for 1 hour. For the first fire after replacing your gasket, gradually heat up your application to cure the cement. This product is meant for indoor stove applications only.