Fritzi J.
- Comment
High-Temperature Black Cement for Installing Stove Door Gaskets
Free shipping
Restore reliable seals on your heating appliance with AW Perkins 80 Black Stove & Gasket Cement. This 2.7 oz tube is formulated as a high-temperature adhesive for installing and securing stove gaskets while helping seal joints exposed to elevated operating temperatures. Its convenient tube design makes it easy to apply during routine maintenance and gasket replacement.
Key Features:
- High-temperature black stove and gasket cement
- Convenient 2.7 oz squeeze tube
- Designed for installing and securing stove gaskets
- Suitable for sealing stove joints where appropriate
- Easy-to-apply formula for maintenance and repair projects
- Ideal for routine gasket replacement and stove servicing
Important Information:
Use only on clean, dry surfaces and follow the appliance manufacturer's installation recommendations. Allow the cement to cure according to the product instructions before operating the stove.
FAQs:
Q: What is this cement used for?
A: It is designed to install stove gaskets and help seal stove joints exposed to high temperatures.
Q: Can this be used during gasket replacement?
A: Yes. It is commonly used when replacing stove door or other appliance gaskets.
Q: Is the cement black?
A: Yes. AW Perkins 80 is a black stove and gasket cement.
Q: Should the stove be used immediately after application?
A: Follow the curing instructions provided with the cement before returning the appliance to service.
Fit / Measuring / Safety Notes:
- Verify the correct adhesive is recommended for your stove or fireplace model.
- Clean away old cement and debris before applying new material.
- Apply only the amount needed for the gasket or joint being sealed.
- Follow all manufacturer curing instructions before operating the appliance.
- Use appropriate personal protective equipment during installation.
Helpful Links:
Product Details / Specifications:
- Brand: AW Perkins
- Item Number: 80
- Product Type: Stove & Gasket Cement
- Color: Black
- Capacity: 2.7 oz
- Application Method: Squeeze tube for controlled dispensing
- Maximum Temperature Rating: Up to 2000°F (1093°C)
- Compatible Surfaces: Steel and cast iron
- Primary Use: Installing fiberglass stove gaskets and sealing stove joints
- Formula: Non-asbestos
Installation
- Remove the old combustor gasket wrap completely.
- Clean the combustor housing area thoroughly.
- Measure and cut the required length.
- Wrap the gasket evenly around the combustor.
- Ensure proper spacing for thermal expansion.
- Secure lightly if needed (e.g., masking tape) during installation.
- Reinstall combustor carefully without over-compressing.
Note: Always allow room for expansion during operation. Over-packing may damage the combustor or stove components.
Estimated Lead Time:
Please allow 1 week for shipping unless otherwise specified.
Questions
