Replacement 7" x 5" Ceramic Glass for Appalachian Double Door Stoves

Overview:

Replace damaged or broken glass in an Appalachian double-door stove with this 7" x 5" custom-cut ceramic replacement glass. The panel measures 3/16" thick, has a subtle amber tint, and is designed to withstand temperatures up to 1250°F.

This ceramic glass can be used for wood, coal, and pellet stove applications when the dimensions and appliance requirements match. Before ordering or installing, verify the required glass size, type, and clearances for your specific appliance.

Key Features:

• Custom-cut 7" x 5" ceramic replacement glass
• Designed for Appalachian double-door stove applications
• 3/16" thick ceramic glass
• Withstands temperatures up to 1250°F
• Subtle amber tint
• Suitable for compatible wood, coal, and pellet stove applications
• Resistant to rapid temperature changes associated with stove operation

Important Information:

Ceramic glass requires room to expand as temperatures rise. Allow at least 1/8" of clearance for thermal expansion when installing the replacement panel. Insufficient clearance can place stress on the glass and lead to breakage.

Mounting screws and other metal hardware also expand when heated. Do not overtighten retainers or mounting hardware against the glass.

Do not substitute ceramic glass for tempered glass in a fireplace door unless the appliance manufacturer specifically approves ceramic glass for that application. Ceramic glass should never be installed in a factory-built or prefab fireplace unless the unit is heater-rated and the glass type is approved for the appliance.

FAQs:

Q: What stove does this glass fit?
A: The provided fit information lists Appalachian double-door stoves. Verify your existing glass dimensions and appliance requirements before ordering.

Q: Can I install the glass tightly against the frame?
A: No. The glass needs room for thermal expansion. Allow at least 1/8" of clearance and do not overtighten mounting hardware.

Q: Can I use this glass in a fireplace door?
A: Only if the appliance manufacturer specifically approves ceramic glass for that application. Do not replace tempered fireplace-door glass with ceramic glass without confirming the appliance requirements.

Q: Can this be installed in a factory-built or prefab fireplace?
A: Ceramic glass should not be installed in a factory-built or prefab fireplace unless the appliance is heater-rated and approved for ceramic glass.

Fit / Measuring / Safety Notes:

• Confirm the required dimensions before ordering. Measure the replacement opening and, when possible, compare those measurements with the original glass and your appliance documentation.
• Allow at least 1/8" of room for thermal expansion. The glass should not be installed under excessive pressure from screws, clips, retainers, or other mounting hardware.
• Always confirm the correct replacement glass type in the appliance owner's manual. Do not assume ceramic and tempered glass are interchangeable. Using an unapproved glass type can create an overheating or fire hazard.

Helpful Links:

• View all Appalachian Replacement Glass Options for other Compatible Configurations
• Shop Stove Door Gasket and Installation Supplies Used During Glass Replacement and Maintenance
• How to Replace Glass on a Wood Stove: Step-by-Step Guide
• Caring for Your Wood Stove: Essential Steps for Safe and Efficient Operation
• Contact Us for Replacement Glass Assistance When You Need Help Confirming Dimensions, Glass Type, or Fit before Ordering