Replacement Ceramic Glass for Appalachian 7GAD – 14" x 8"
Overview:
Replace damaged or worn stove glass with this custom-cut 14" x 8" ceramic glass for Appalachian 7GAD applications. The glass measures 3/16" thick, features a subtle amber tint, and withstands temperatures up to 1250°F.
Designed for high-temperature stove applications, ceramic glass resists the rapid temperature changes that occur when flames periodically contact the viewing panel. Ceramic glass can withstand up to three times the heat of tempered glass and may be used for appropriate wood, coal, and pellet stove applications.
Always verify the required dimensions, glass type, and installation clearances before ordering or installing replacement glass.
Key Features:
- Custom-cut ceramic replacement glass
- 14" wide x 8" high
- 3/16" glass thickness
- Withstands temperatures up to 1250°F
- Subtle amber tint
- Designed to resist thermal shock from extreme temperature changes
- Suitable for appropriate wood, coal, and pellet stove applications
- Listed for Appalachian 7GAD applications
Important Information:
Ceramic glass expands when exposed to high temperatures. Installation should provide at least 1/8" of room for thermal expansion. Insufficient clearance can place stress on the glass and cause breakage.
Mounting screws and other metal hardware also expand when heated. Do not overtighten glass-retaining hardware. Hardware secured too tightly can place excessive pressure on the glass as the stove reaches operating temperature.
Ceramic glass should not be substituted for tempered glass simply because the dimensions match. Always use the glass type specified or approved for your appliance.
FAQs:
Q: What size is this replacement glass?
A: The glass measures 14" wide x 8" high and is 3/16" thick.
Q: Can flames contact this glass?
A: The glass is manufactured for high-temperature stove applications where flames may periodically contact the viewing glass and is designed to resist thermal shock.
Q: Can I install the glass tightly in the frame?
A: No. Allow at least 1/8" of room for thermal expansion and do not overtighten the mounting hardware.
Q: Can ceramic glass replace tempered fireplace glass?
A: Not automatically. Do not replace tempered fireplace-door glass with ceramic glass unless the appliance or door is specifically approved for that glass type. Check the manufacturer's documentation before installation.
Q: Can this glass be installed in a factory-built or prefab fireplace?
A: Ceramic glass should not be installed in a factory-built or prefab fireplace unless the unit is heater-rated and the glass type is approved for that application.
Fit / Measuring / Safety Notes:
- Verify the 14" x 8" dimensions against the glass required by your appliance before ordering.
- Confirm that 3/16" ceramic glass is the correct glass type and thickness for your stove.
- Provide at least 1/8" of room for thermal expansion during installation.
- Do not force the glass into an opening that does not provide the required clearance.
- Do not overtighten screws, clips, or other retaining hardware against the glass.
- Metal mounting components expand as they heat and can place damaging pressure on glass if installed too tightly.
- Do not substitute ceramic glass for tempered glass unless the appliance manufacturer specifically permits ceramic glass.
- Some masonry fireplace doors may be approved for ceramic glass; consult the applicable owner's manual before replacement.
- Do not install ceramic glass in a factory-built or prefab fireplace unless the unit is heater-rated and approved for this type of glass.
- Follow the appliance manufacturer's installation and safety requirements whenever available.
Helpful Links:
- View all Appalachian Replacement Glass Products for other Available Stove Glass Configurations
- Shop Stove Door Gasket and Glass-installation Supplies for Related Maintenance Needs
- How to Replace Glass on a Wood Stove: Step-by-Step Guide
- Caring for Your Wood Stove: Essential Steps for Safe and Efficient Operation
- Contact Us for Help Identifying the Correct Replacement Glass When Additional Fit Information is Needed
Product Details / Specifications:
- Product Type: Ceramic replacement stove glass
- Width: 14"
- Height: 8"
- Thickness: 3/16"
- Maximum Stated Temperature: 1250°F
- Tint: Subtle amber
- Configuration: Custom-cut ceramic glass
- Intended Applications: Appropriate wood, coal, and pellet stoves
- Thermal Characteristics: Designed to resist extreme temperature changes and thermal shock
Fits Stove Models:
- Appalachian 7GAD
Manufacturer Warranty:
Fast Replacement Glass provides pyroceram ceramic glass to our customers based on specific size requirements. We warrant to our immediate customers that the glass product ordered will meet certain standards and will be free from material and workmanship defects on the day of shipment.
Fast Replacement Glass does not offer warranties on performance or customer use of the glass. How a customer handles, installs, and uses processes the glass product is solely the customer's responsibility. Fast Replacement Glass cannot be held liable for breakage, damage, or failure of the product due to wrongful installation or if the glass pane is too tight and doesn't allow for thermal expansion during operation of the heating appliance.
Estimated Lead Time
Orders typically leave our warehouse within 2–3 business days. After your order ships, delivery time will depend on your location and the carrier's transit schedule.
Processing and shipping times may vary based on product availability and carrier service. If you have any questions about current stock or estimated delivery dates, please contact us before placing your order.
No reviews found
