Replacement 3-Inch Interam Wrap for Catalytic Combustor Sealing

Maintain a dependable seal around your catalytic combustor with this 3-Inch x 1/16-Inch Combustor Gasket Wrap, commonly known as Interam Wrap. Sold by the foot, this heat-reactive material allows you to purchase only the amount needed for your repair while providing a secure seal that accommodates thermal expansion during stove operation. Designed for catalytic wood stoves and compatible fireplaces, it helps improve combustor stability and sealing performance in high-temperature environments.

Key Features:

• Sold by the foot for custom-length installations
• Measures 3 inches wide by 1/16 inch thick
• Manufactured from heat-reactive Interam material
• Expands during operation to create a tight combustor seal
• Helps support proper combustor positioning
• Designed for extreme high-temperature environments
• Can be cut to the required length for your application

Important Information:

This gasket wrap is intended for catalytic combustor installations in compatible wood stoves and fireplaces.

Replace the Interam wrap each time the combustor is removed for service. Reusing previously heated material is not recommended because it may crumble or lose its sealing ability.

Do not over-pack the combustor housing. The material is designed to expand significantly during normal stove operation.

FAQs:

Q: Is this gasket wrap sold by the foot?
A: Yes. Order the length needed for your combustor and trim it during installation.

Q: Should I replace the wrap whenever I remove the combustor?
A: Yes. New Interam wrap should be installed each time the combustor is removed for service.

Q: Can the wrap be reused?
A: No. After repeated heat exposure, the material may deteriorate and should be replaced.

Q: How does Interam wrap work?
A: The material expands as it heats, creating a secure seal around the catalytic combustor while allowing for thermal expansion.

Q: How do I determine the correct length?
A: For rectangular combustors, measure all four sides and add the dimensions together. For round combustors, multiply the diameter by 3.14 and round up to the nearest foot.

Fit / Measuring / Safety Notes:

• Verify your combustor requires 3-inch by 1/16-inch Interam wrap before ordering.
• Measure carefully and purchase enough material to complete the installation.
• Cut the wrap to the required length before installation.
• Do not compress or over-pack the combustor housing.
• Install according to the appliance manufacturer's service instructions.
• Replace the wrap whenever the combustor is removed.
• Intended for catalytic wood stoves and compatible fireplaces only.

Helpful Links:

• Maintenance & Care
• Gasket Replacement Guide
• Stove Education